Molle Panel Install

Congratulations on your purchase of the TC Broncos Molle Panel, Our design works with most molle accessories from top brands like 5.11 Tactical. 

To start, Remove the plastic panel just above the wheel well.

If you have a Soft top, Remove the two bolts holding the soft top on and use these same two bolts to secure the molle panel in place.

On hard top models you will use the supplied bolts to secure the panel into the body. 

once the bottom is in place secure the top bolt (supplied) into the roll cage. 

the image bellow is bolted to the side however the newer panels being shipped bolt from underneath the roll cage in the same place.

once all the bolts are installed and tightened, replace the plastic panel and repeat on the other side.

If you have any questions contact us at TCBroncos.com